Charcoal Refill Kit for Vapor Trapper™ — Proprietary Media (CHARKIT)
Restore like-new odor control with the same high-performance charcoal blend used in every Vapor Trapper™ canister. This refill media packs firmly, resists channeling, and is formulated to absorb fuel vapors for years of service.
-
Same media as new units — engineered for a firm, secure pack and long life.
-
Enough to refill one 8" canister (you’ll have extra on a 6" or 4" canister).
-
Keeps systems performing at their best — ideal after many years of use or if liquid fuel ever reached the charcoal.
-
Simple, serviceable solution — refresh the canister instead of replacing it.
Note - Vapor Trapper products have an additional shipping charge applied at checkout.
Compatibility
What’s included
- 1 × pre-bagged charcoal refill blend (sufficient for one 8" canister)
When should I replace the charcoal?
- You notice a return of fuel odor after years of service.
- The canister was exposed to liquid fuel due to overfilling or low routing of the vent line.
Refill overview
Follow the Vapor Trapper™ service instructions. General steps: remove the canister, empty the spent media, clean out residual dust, then refill without over-packing so air can pass through the charcoal. Reassemble and leak-check before driving.
Pro tips: Store any unused charcoal sealed and dry. Keep your vent line routed upward to prevent liquid fuel from reaching the canister. For a complete, AN-plumbed vent system, pair your canister with a bulkhead rollover valve and secure mounting.
Note: Charcoal media only — Vapor Trapper™ canister, clamps, and fittings sold separately. For emissions-equipped vehicles, follow local regulations; this media supports vent-to-atmosphere systems.
