Skip to product information
Kit contents — 10 ft stainless PTFE hose plus 4 AN hose ends on a workbench
1/2
  • Kit contents — 10 ft stainless PTFE hose plus 4 AN hose ends on a workbench
  • 10 ft stainless PTFE hose with 2 straight, 1×45°, 1×90° AN-6/8/10 hose ends
10 ft Stainless PTFE Hose Kit — AN-6 / AN-8 / AN-10 (4 Reusable Ends)

10 ft Stainless PTFE Hose Kit — AN-6 / AN-8 / AN-10 (4 Reusable Ends)

$109.99 USD
Free Shipping $99+Free Shipping $99+ Lifetime WarrantyLifetime Warranty Expert SupportExpert Support

10 ft stainless braided PTFE hose kit — AN-6 / AN-8 / AN-10

Replace crusty OE hardlines, route clean transmission cooler lines, or run a pump-to-carb feed the right way. This 10 ft kit pairs our stainless-braided PTFE hose with a smart mix of reusable hose ends to handle straight shots and tight bends—reliable with gasoline, E10–E85, and diesel.

How to order

  • Option 1 — AN size: select -6 AN, -8 AN, or -10 AN.
  • Option 2 — PTFE fitting color: choose your preferred color for the included PTFE hose ends.

What’s included

  • Hose: 10 ft of PTFE-lined hose in the AN size you select with a single stainless-steel outer braid (PTFE core → stainless outer braid).
  • Reusable PTFE hose ends (4 total): 2 × straight, 1 × 45°, 1 × 90° — matched to your AN size.

Why this kit

  • Perfect 10 ft length: common for OE hardline replacement, transmission cooler runs, and pump-to-carb feeds.
  • PTFE = no fuel smell: zero vapor bleed-through; stable with modern fuels including ethanol blends.
  • Stainless-braided durability: abrasion-resistant with a clean, pro look.
  • Reusable ends: assemble, re-clock, or service without tossing fittings.
  • Clean sealing: 37° AN flare — no thread sealant on AN flare joints.

Need more hose?

Doing a full-length feed/return or a dual trans-cooler loop? Step up to longer bundles and add fittings as needed:

Popular uses

  • Replace OE hardlines with flexible, serviceable AN plumbing
  • Transmission cooler lines (pair with transmission adapter fittings)
  • Pump-to-carb runs and regulator jumpers

Install tips

  • Cut clean: wrap the cut area tightly with tape before using AN shears or a cutoff wheel to control braid fray.
  • Seal correctly: AN seals at the 37° flare (no thread sealant). ORB ports seal on the O-ring. NPT ports require a fuel-safe sealant.
  • Secure the run: support lines with cushioned clamps to prevent vibration/chafe and keep routing tidy.
  • Not for brake or power-steering systems.

Specs

Hose family AN size Inside diameter (ID) Outside diameter (OD) Length Liner Outer braid Included fittings
Stainless PTFE -6 AN 0.320" 0.435" 10 ft PTFE (gasoline, E10–E85, diesel) Stainless-steel outer braid 2× straight, 1× 45°, 1× 90°
Stainless PTFE -8 AN 0.425" 0.550" 10 ft PTFE (gasoline, E10–E85, diesel) Stainless-steel outer braid 2× straight, 1× 45°, 1× 90°
Stainless PTFE -10 AN 0.500" 0.625" 10 ft PTFE (gasoline, E10–E85, diesel) Stainless-steel outer braid 2× straight, 1× 45°, 1× 90°

Pair it with

Helpful resources

AN Hose 101 — Learn more

Good to know

PTFE hose is stiffer than rubber. Plan gentle bends, use angled ends to relieve strain, keep clear of hot headers/sharp edges, and secure long runs with clamps for a pro finish.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

You may also like