Charcoal Refill Kit for Vapor Trapper™ — Proprietary Media (CHARKIT)

Restore like-new odor control with the same high-performance charcoal blend used in every Vapor Trapper™ canister. This refill media packs firmly, resists channeling, and is formulated to absorb fuel vapors for years of service.

Same media as new units — engineered for a firm, secure pack and long life.
Enough to refill one 8" canister (you’ll have extra on a 6" or 4" canister).
Keeps systems performing at their best — ideal after many years of use or if liquid fuel ever reached the charcoal.
Simple, serviceable solution — refresh the canister instead of replacing it.

Note - Vapor Trapper products have an additional shipping charge applied at checkout.

Compatibility

Fits all Vapor Trapper™ canisters (4", 6", 8"; Universal & High Performance).
Use with: Vapor Trapper™ Charcoal Canister.

What’s included

1 × pre-bagged charcoal refill blend (sufficient for one 8" canister)

When should I replace the charcoal?

You notice a return of fuel odor after years of service.
The canister was exposed to liquid fuel due to overfilling or low routing of the vent line.

Refill overview

Follow the Vapor Trapper™ service instructions. General steps: remove the canister, empty the spent media, clean out residual dust, then refill without over-packing so air can pass through the charcoal. Reassemble and leak-check before driving.

Pro tips: Store any unused charcoal sealed and dry. Keep your vent line routed upward to prevent liquid fuel from reaching the canister. For a complete, AN-plumbed vent system, pair your canister with a bulkhead rollover valve and secure mounting.

Note: Charcoal media only — Vapor Trapper™ canister, clamps, and fittings sold separately. For emissions-equipped vehicles, follow local regulations; this media supports vent-to-atmosphere systems.